Product Details
 

 
   
AquaSensors AnalogPlus Conductivity Sensor

 

 

Product Features

 

:: Two-electrode conductivity sensors designed for continuous use in the most demanding industrial applications

:: 0 to 5000 μS/cm measurement range (1.0 cell)

:: 0 to 18.2 MΩ • cm measurement range (0.01 cell)

:: Titanium electrodes (0.01, 0.1 and 1.0 cell constants)

:: Offered in PEEK for high temperature applications

:: Offered in CPVC where higher cost materials are not required

 

Specifications

 

Product Specification

Description

Measurement

Range: 0.01 Cell: 18.2 MΩ • cm to 50 mS/cm
0.1 Cell: 0 to 500 mS/cm 1.0 Cell: 0 to 5000 mS/cm

System Performance*

Resolution: 4.5 significant digits

 

Accuracy: 0.1% of reading

 

Step Response Time: 90% in 30 seconds

Operational Environment

PEEK Sensor Head
Temperature Range: –5 °C to 95 °C
Maximum Pressure: 150 psig @ 95 °C
Maximum Flow Rate: 10 ft/second

CPVC Sensor Head
Temperature Range: –5 °C to 75 °C
Maximum Pressure: 150 psig @ 75 °C
Maximum Flow Rate: 10 ft/second

Construction

Cell Constants‡: 0.01 for resistivity, 0.1 and
1.0 for conductivity
Electrode Material: Titanium or
316 stainless steel
O-rings: Viton® (other materials available)
Sensor Material: PEEK or CPVC)
Weight: 0.5 lbs (PEEK or CPVC)

Approvals

Meets CE requirements for heavy industrial use

Note: *Typical at 25°C with 20 feet of cable.

 

Applications

Recommended for: Food processing, Pharmaceutical, Water production, Reverse osmosis filters, Ultra filtration, Distilled water, Semiconductor, Power generation

 

Ordering Information (Conductivity Sensor)

 

Part No.

Description

SC-b-c-x-z-u-R

Conductivity Sensor

Body Material (b)

2 = CPVC
3 = PEEK

Electrode Type (c)

1 = Titanium
2 = 316 Stainless Steel

Sensor Tip (x)

A 0.1 Cell Constant (500 μS/cm Range. PEEK Material Recommended)
B 1.0 Cell Constant (5000 μS/cm Range)
D 0.01 Cell Constant (Resistivity to 50 μS/cm Range. PEEK Material Required)

Electrode Spacing (z)

1 = Concentric

Cable Length (u)

1 = 10 feet
2 = 20 feet
3 = 30 feet

Note: Consult for additional configurations and accessories

 

Thermo Scientific AV88 AnalogPlus Universal Analyzer

 

Features & Benefits

 

:: Connects to any AnalogPlus sensor using plug-in module
:: Convenient ¼ DIN enclosure

:: Display sensor and temperature data

:: Menu functions: Calibration, configuration and diagnostics


:: Digital protocol options for remote measurement, calibration, configuration and diagnostics

:: Two 4 to 20 mA current outputs

:: Two Form C relays for alarm, control and wash

:: PID controller for use with pH and conductivity

:: 7 conduit knockouts for easy cabling

 

 

Specifications

 

Product Specification

Description

Mounting Options

Wall-mount Enclosure: NEMA 4X
Panel-mount: ¼ or ½ DIN NEMA
4X panel mount available
Display Only: with NEMA 4X gasket

User Interface

Display: 2 line by 16 character LCD
Backlight: High contrast green
Keypad: 4 directional arrows, MENU,
ESCAPE and ENTER

Environmental Conditions

Ambient Operating Temperature Range:
–20 to 65 °C
Maximum Relative Humidity:
95% non-condensing

Interchangeable
Sensor Modules

A 1-inch long personality module plugs in
to the AV88 to make it work with any
AnalogPlus sensor configured with a
PT1000 temperature element
Supported Sensors: pH, ORP, two
electrode conductivity, two electrode
resistivity, toroidal conductivity, dissolved
oxygen and dissolved ozone

4 to 20 Milliamp Current Output Options

Two isolated outputs (standard)
Assignable parameters
PID function when pH or conductivity
parameter selected
Loop power provided by AV88

Relays

Two 1 amp Form C relays with NO and
NC contacts
Assignable parameters
Configured for alarm, control and timer
functions

Digital
Communications

Options to Host Computer Network:
MODBUS® RTU, DeviceNet,
Modbus RS232, RS232 ASCII, CANopen,
Ethernet IP, Modbus TCP, TCP/IP
Others: Consult factory

Power Supply

Input: 10 to 30 VDC or 100 to 240 VAC
(optional)
Power: 2W at 25°C

Approvals

Meets CE requirements for heavy
industrial use

 

Order Information

 

Part No.

Description

AV88-v-w-x-y-z

Universal Analyzer

Measurement
Parameter (v)

A = pH
B = ORP
C = Conductivity
D = Resistivity
E = Toroidal Conductivity
F = Dissolved Oxygen (ppm)
G = Dissolved Ozone

Enclosure (w)

B = ¼ DIN NEMA 4X Wall-mount Enclosure

Communications (x)

0 = None
1 = RS232 ASCII
2 = Modbus RS232
4 = MODBUS RTU (for Modbus + Profibus)
5 = DeviceNet
6 = CANopen
7 = Ethernet IP, Modbus TCP, TCP/IP

Relays (y)

A = None
C = Two

Power (z)

1 = 24 VDC
2 = 100 to 240 VAC

 

Download Brochure

Analog Plus Conductivity Sensor
AV88 AnalogPlus Universal Analyzer

     
© Copyright 2010 ITLIPL Designed by DBS   Home | About Us | Products | What's New | Career | Clients | Contact Us