Product Details

Gyratory compactor


NT Build 427

54-C0252/C; 54-C0251/A


General Description


Since 1985 the gyratory compactor has been used for concrete materials in Finland and Scandinavia. The method is used for mix design and quality control mainly in concrete product plants, where low workable and zero slump concrete is used (for such products as hollow-core slabs, tubes and paving blocks).

The method is used for:
• Mix design simulating selected production processes
• Specimen preparation for strength tests (fresh and cured)
• Research of mix related phenomena (workability, curing time, admixtures, etc.)

Specification 54-C0252/C 54-C0251/A
Specimen Size 100 mm dia. x 90÷130 mm height
Gyratory Angle (Calibrated by Internal Load Simulator) 40mrad (2° 17') fixed Adjustable from 0 to 50mrad (2° 86')
Number of Cycles Adjustable from 2 to 512
Rotation Speed 30 to 120 cycles/min, adjustable
Vertical Pressure 60 to 320 kPa, adjustable
Air Cylinder(s) 63 mm diameter Twin 50 mm diameter each
Working Air Pressure 8 bar
Max. Air Pressure Supply 10 bar ( a 5 mm filter is included)
Vertical Pressure Gauge Range 0-10 bar Two gauges: range 0-10 and 0-4 bar
Shear Force Measurement No Yes, by load cell installed
Weight 55 kg approx. 95 kg approx.
Dimensions 35x48x93 cm approx. 50x60x110 cm approx.


Ordering Information


54-C0252/C Gyratory compactor for concrete. 230 V, 50 Hz, 1 ph
54-C0251/A Gyratory compactor mod. ICT-100R for cement and concrete. 230 V, 50-60 Hz, 1 ph.
54-C0250/C5 100 mm mould for fresh concrete gyratory compactor


Download Brochure

Gyratory Compactor

© Copyright 2010 ITLIPL Designed by DBS   Home | About Us | Products | What's New | Career | Clients | Contact Us