Product Details
 

 
   
Sercomp 7 Automatic Control Console

50-C7022

 

General Description

 

• Drives up to 4 test frames (not simultaneously)
• Automatic test performance with PID closed loop control
• Allows certification of correct test procedure saving and printing also the load/time graph
• Allows complex tests with various phases to be programmed by the user (e.g. for elastic modules determination)
• Programmable load and stress rate
• Programmable test cycles up to 100 different ramps
• Unit selection: kN, kgf, lbf
• Languages: English, French, Spanish, German, and Italian
• Real time plot of stress vs. time
• Real time download to PC via RS 232 port
• Software calibration facilities and linearisation of up to 10 segments
• Real time clock and date
• Resolution 1/65.000
• Memory for up to 500 tests including test data, results and load vs. time plot
• Facility for direct connection to A4 parallel printer
• Remote trouble shooting

 

Technical Specifications

 

Max. Working Pressure: 700 bar
Max. Oil Delivery: 0.7 litres/min Flow control by servo-valve system
Hydraulic Port: No. 2/4 (with 50-C7022/UP2)
Power: 750 W
Voltage: 230 V, 50-60 Hz, 1 ph. (other voltages available on order)
Dimensions: 470x410x1000 mm
Weight Approx.: 120 kg

On Board Firmware
The installed Firmware enables the performance of general compression, flexural, splitting tests including also other load and stress ramps. The closed loop control enables the automatic rapid piston approach, zeroing, user defined load ramp, failure detection and unloading.

PC Software
The Sercomp 7 can be connected to a PC for Data acquisition.

Complex Tests & Elastic Modulus Determination
As well as normal tests (compression and flexure) the Sercomp 7 can also be user programmed to perform complex tests with load/unload phases.

Each phase is characterised by its load rate (positive, negative or nil) and target load to be reached. Up to 100 phases may be programmed.

Typical Cyclic Tests With Positive & Negative Ramps
For example this feature can be used to program test for elastic modulus determination or special research tests.

 

Ordering Information

 

• 50-C7022 Sercomp 7, Automatic Control Console for compression and flexure frames. 230 V, 50-60 Hz, 1 ph.
• 50-C7022/UP2 Upgrading of the Sercomp 7 or MCC 8 control consoles for the control of up to 4 frames

 

Download Brochure

 

Sercomp 7 Automatic Control Console

     
© Copyright 2010 ITLIPL Designed by DBS   Home | About Us | Products | What's New | Career | Clients | Contact Us